document number: 88546 for technical questions within your region, please contact one of the following: www.vishay.com revision: 01-feb-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 surface mount glass passivated junction rectifier bym10-50 thru bym10-1000, gl41a thru gl41y vishay general semiconductor features ? superectifier structure for high reliability condition ? ideal for automated placement ? low forward voltage drop ? low leakage current ? high forward surge capability ? meets environmental standard mil-s-19500 ? meets msl level 1, per j-std-020, lf maximum peak of 250 c ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec typical applications for use in general purpose rect ification of power supplies, inverters, converters and freewheeling diodes for consumer, automotive and telecommunication. mechanical data case: do-213ab, molded epoxy over glass body molding compound meets ul 94 v-0 flammabi lity rating base p/n-e3 - rohs compliant, commercial grade base p/nhe3 - rohs compli ant, aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 e3 suffix meets jesd 201 cla ss 1a whisker test, he3 suffix meets jesd 201 class 2 whisker test polarity: two bands indicate cathode end - 1 st band denotes device type and 2 nd band denotes repetitive peak reverse voltage rating primary characteristics i f(av) 1.0 a v rrm bym-50-1000 50 v to 1000 v gl41a-y 50 v to 1600 v i fsm 30 a i r 10 a e as 5 mj v f 1.1 v, 1.2 v t j max. 175 c do-213ab maximum ratings (t a = 25 c unless otherwise noted) parameter symbol bym 10-50 bym 10-100 bym 10-200 bym 10-400 bym 10-600 bym 10-800 bym 10-1000 unit standard recovery device: 1 st band is white gl41a gl41b gl41d gl41g gl41j gl41k gl41m gl41t gl41y polarity color bands (2 nd band) gray red orange yellow green blue violet white brown maximum repe titive peak reverse voltage v rrm 50 100 200 400 600 800 1000 1300 1600 v maximum rms voltage v rms 35 70 140 280 420 560 700 910 1120 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 1300 1600 v maximum average forward rectified current (fig. 1) i f(av) 1.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 30 a
www.vishay.com for technical questions wi thin your region, please contact one of the following: document number: 88546 2 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 01-feb-11 bym10-50 thru bym10-1000, gl41a thru gl41y vishay general semiconductor notes (1) thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) co pper pads to each terminal (2) thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6. 0 mm) copper pads to each terminal maximum full load reverse current full cycle average at t a = 75 c i r(av) 30 a non-repetitive peak reverse avalanche energy at t j = 25 c, i as = 1 a, l = 10 mh e as 5-mj operating junction and storage temperature range t j , t stg - 65 to + 175 c electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol bym 10-50 bym 10-100 bym 10-200 bym 10-400 bym 10-600 bym 10-800 bym 10-1000 unit gl41a gl41b gl41d gl41g gl41j gl41k gl41m gl41t gl41y maximum instantaneous forward voltage 1.0 a v f 1.1 1.2 v maximum dc reverse current at rated dc blocking voltage t a = 25 c i r 10 a t a = 125 c 50 typical junction capacitance 4.0 v, 1 mhz c j 8.0 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol bym 10-50 bym 10-100 bym 10-200 bym 10-400 bym 10-600 bym 10-800 bym 10-1000 unit gl41a gl41b gl41d gl41g gl41j gl41k gl41m gl41t gl41y typical thermal resistance r ? ja (1) 75 c/w r ? jt (2) 30 maximum ratings (t a = 25 c unless otherwise noted) parameter symbol bym 10-50 bym 10-100 bym 10-200 bym 10-400 bym 10-600 bym 10-800 bym 10-1000 unit standard recovery device: 1 st band is white gl41a gl41b gl41d gl41g gl41j gl41k gl41m gl41t gl41y
document number: 88546 for technical questions within your region, please contact one of the following: www.vishay.com revision: 01-feb-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 3 bym10-50 thru bym10-1000, gl41a thru gl41y vishay general semiconductor note (1) aec-q101 qualified ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - forward current derating curve fig. 2 - maximum non-repetiti ve peak forward surge current fig. 3 - typical instantaneous forward characteristics fig. 4 - maximum non-repetiti ve peak forward surge current ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode bym10-600-e3/96 0.114 96 1500 7" diam eter plastic tape and reel bym10-600-e3/97 0.114 97 5000 13" diam eter plastic tape and reel gl41j-e3/96 0.114 96 1500 7" diamet er plastic tape and reel gl41j-e3/97 0.114 97 5000 13" diamet er plastic tape and reel bym10-600he3/96 (1) 0.114 96 1500 7" diameter plastic tape and reel bym10-600he3/97 (1) 0.114 97 5000 13" diameter plastic tape and reel gl41jhe3/96 (1) 0.114 96 1500 7" diameter plastic tape and reel gl41jhe3/97 (1) 0.114 97 5000 13" diameter plastic tape and reel 25 50 75 100 125 150 175 0 0.25 0.50 0.75 1.0 60 hz resisti v e or ind u cti v e load a v erage for w ard rectified c u rrent (a) terminal temperat u re (c) gl41a thr u gl41m gl41t thr u gl41y 1 10 100 10 5.0 15 20 25 30 gl41a thr u gl41m 0 nu m b er of cycles at 60 hz peak for w ard s u rge c u rrent (a) t j = t j max. 8 .3 ms single half sine-wa v e 0.4 0.6 0. 8 1.0 1.2 1.4 1.6 10 1 0.1 0.01 t j = 25 c p u lse width = 300 s 1 % d u ty cycle instantaneo u s for w ard voltage (v) instantaneo u s for w ard c u rrent (a) gl41a thr u gl41j gl41k thr u gl41y 0 20 40 60 8 0 100 0.01 0.1 1 10 instantaneo u s re v erse c u rrent (a) t j = 100 c t j = 25 c percent of rated peak re v erse voltage (%)
www.vishay.com for technical questions wi thin your region, please contact one of the following: document number: 88546 4 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 01-feb-11 bym10-50 thru bym10-1000, gl41a thru gl41y vishay general semiconductor fig. 5 - typical junction capacitance fig. 6 - typical transient thermal impedance package outline dimensions in inches (millimeters) 1 10 100 10 1 100 re v erse voltage (v) j u nction capaci tance (pf) t j = 25 c f = 1.0 mhz v sig = 50 mv p-p 0.01 0.1 10 1 100 0.1 10 100 1 mo u nted on 0.20" x 0.27" (5 mm x 7 mm) copper pad areas ( t - p u lse d u ration (s) transient thermal impedance (c/w) do-213ab 1 st b and denotes type and positi v e end (cathode) 1 st band soldera b le ends d2 = d1 + 0 - 0.00 8 (0.20) d2 0.105 (2.67) 0.095 (2.41) d1 = 0.022 (0.56) 0.01 8 (0.46) 0.022 (0.56) 0.01 8 (0.46) 0.205 (5.2) 0.1 8 5 (4.7) mounting pad layout 0.13 8 (3.5) max. 0.049 (1.25) mi n . 0.23 8 (6.0) ref. 0.11 8 (3.0) mi n .
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
